Loading page icon VHCT

Installation System

Extended Version


Properties of architectural concrete

  • Architectural concrete For indoor and outdoor use

    For indoor and outdoor use

  • Architectural concrete Weather-resistant

    Weather-resistant

  • Architectural concrete Available in many colors and dimensions

    Available in many colors and dimensions

  • Architectural concrete Fire-resistant - can be used on fireplaces

    Fire-resistant - can be used on fireplaces

  • Architectural concrete Natural

    Natural

Montage

1.

Where will you install?

  • Concrete, mineral, ceramic, and plaster surfaces
  • Drywall
  • OSB, MDF, HPL, PCW boards
  • Thanks to the small thickness of the plates, their weight has been minimized, facilitating installation. Before purchasing, check the weight of the plates. The mounting surface should be load-bearing to support the weight of the plates.
2.

How to install?

  • Plates can be mounted directly to the substrate using glue, screws, or a mounting system.
  • For adhesive installation: clean and prime the surface. Apply the adhesive with a notched trowel to both the wall and the plate. Do not apply the adhesive in patches or in a "frame."
  • The thickness of the adhesive between the wall and the plate should not exceed 10 mm.
  • If there are doubts about whether the surface can support the weight of the plate, you can create a frame with OSB boards mechanically attached to the wall or secure the plates with screws.
  • Find all installation instructions here:
    Technical Sheet.pdf

Needed for installation

Inquiry about an offer

Other products: Architectural Concrete Slabs / 3D Panels