Loading page icon VHCT

DEEPLY PENETRATING PRIMER – VHCT PERFECT GRUNT


Downloadable files

  • KARTA techniczna GRUNT 2016.pdf
  • Additional information

    APPLICATION: For priming absorbent, mineral building substrates inside and outside buildings. Especially for substrates made of cement-lime plasters, concrete, brick, as well as porous renders and other porous materials that require priming for the following purposes: improving adhesion, extending the open time, reducing the consumption of applied material per unit area, ensuring proper bonding of adhesive, reducing and equalizing the substrate's water absorption, enhancing surface strength, eliminating dusting and flaking (chalking), and providing temporary protection against adverse weather conditions.

    PRODUCT DESCRIPTION: Professional water-based, solvent-free primer based on an increased amount of synthetic resin aqueous dispersion. It penetrates into the pores of materials and, after water evaporation, deposits a dry residue on the surface of their walls.

    PROPERTIES: Easy to apply, deep-penetrating, eco-friendly.

    COLOR: Colorless.

    USAGE: Approximately 0.05 liters per square meter to about 0.20 liters per square meter, depending on the type and absorbency of the substrate. The final consumption of the material depends on local conditions, and it is recommended to determine it based on tests carried out on a representative substrate.

    PACKAGING: Plastic bottles of 2 or 5 liters.

    Properties of architectural concrete

    • Architectural concrete For indoor and outdoor use

      For indoor and outdoor use

    • Architectural concrete Weather-resistant

      Weather-resistant

    • Architectural concrete Available in many colors and dimensions

      Available in many colors and dimensions

    • Architectural concrete Fire-resistant - can be used on fireplaces

      Fire-resistant - can be used on fireplaces

    • Architectural concrete Natural

      Natural

    Montage

    1.

    Where will you install?

    • Concrete, mineral, ceramic, and plaster surfaces
    • Drywall
    • OSB, MDF, HPL, PCW boards
    • Thanks to the small thickness of the plates, their weight has been minimized, facilitating installation. Before purchasing, check the weight of the plates. The mounting surface should be load-bearing to support the weight of the plates.
    2.

    How to install?

    • Plates can be mounted directly to the substrate using glue, screws, or a mounting system.
    • For adhesive installation: clean and prime the surface. Apply the adhesive with a notched trowel to both the wall and the plate. Do not apply the adhesive in patches or in a "frame."
    • The thickness of the adhesive between the wall and the plate should not exceed 10 mm.
    • If there are doubts about whether the surface can support the weight of the plate, you can create a frame with OSB boards mechanically attached to the wall or secure the plates with screws.
    • Find all installation instructions here:
      Technical Sheet.pdf

    Needed for installation

    Inquiry about an offer

    Other products: Architectural Concrete Slabs / 3D Panels