PB 59 1350 x 498 x 35 mm
Architectural Concrete 3D PB 59
PB 59 1350 x 498 x 35 mm
The available colors:
Downloadable files
Additional information
Modernist 3D panel design made of real architectural concrete. The panel in the offered pattern gives any interior a timeless yet modern design. The charm of this layout lies in its geometric simplicity, fitting well into modern and elegant interiors.
Properties of architectural concrete
-
For indoor and outdoor use
-
Weather-resistant
-
Available in many colors and dimensions
-
Fire-resistant - can be used on fireplaces
-
Natural
Montage
1.
Where will you install?
- Concrete, mineral, ceramic, and plaster surfaces
- Drywall
- OSB, MDF, HPL, PCW boards
- Thanks to the small thickness of the plates, their weight has been minimized, facilitating installation. Before purchasing, check the weight of the plates. The mounting surface should be load-bearing to support the weight of the plates.
2.
How to install?
- Plates can be mounted directly to the substrate using glue, screws, or a mounting system.
- For adhesive installation: clean and prime the surface. Apply the adhesive with a notched trowel to both the wall and the plate. Do not apply the adhesive in patches or in a "frame."
- The thickness of the adhesive between the wall and the plate should not exceed 10 mm.
- If there are doubts about whether the surface can support the weight of the plate, you can create a frame with OSB boards mechanically attached to the wall or secure the plates with screws.
-
Find all installation instructions here:
Technical Sheet.pdf