RYFEL – 1350 x 600 x 12 mm
Architectural Concrete 3D PB 37
RYFEL – 1350 x 600 x 12 mm
The available colors:
Additional information
WEIGHT: | 19 kg |
---|---|
PRICE PER M² |
Above 300 zł |
THICKNESS |
1,2 cm |
WIDTH |
60 cm |
HEIGHT |
135 cm |
INSTALLATION |
Glue or frame |
BRAND |
VHCT |
A 3D panel made of architectural concrete in the form of parallel ribs of equal width. The vertical arrangement of the panel will optically affect the size of the room. It is suitable for use in industrial, modern, and even minimalist interiors as a distinctive feature.
Properties of architectural concrete
-
For indoor and outdoor use
-
Weather-resistant
-
Available in many colors and dimensions
-
Fire-resistant - can be used on fireplaces
-
Natural
Montage
1.
Where will you install?
- Concrete, mineral, ceramic, and plaster surfaces
- Drywall
- OSB, MDF, HPL, PCW boards
- Thanks to the small thickness of the plates, their weight has been minimized, facilitating installation. Before purchasing, check the weight of the plates. The mounting surface should be load-bearing to support the weight of the plates.
2.
How to install?
- Plates can be mounted directly to the substrate using glue, screws, or a mounting system.
- For adhesive installation: clean and prime the surface. Apply the adhesive with a notched trowel to both the wall and the plate. Do not apply the adhesive in patches or in a "frame."
- The thickness of the adhesive between the wall and the plate should not exceed 10 mm.
- If there are doubts about whether the surface can support the weight of the plate, you can create a frame with OSB boards mechanically attached to the wall or secure the plates with screws.
-
Find all installation instructions here:
Technical Sheet.pdf