FALA – 3D panels – 1000 x 500 x 35 mm
Architectural Concrete 3D PB 03
FALA – 3D panels – 1000 x 500 x 35 mm
The available colors:
Additional information
WEIGHT: | 23 kg |
---|---|
PRICE PER M² |
Above 300 zł |
THICKNESS |
3,2 cm |
WIDTH |
50 cm |
HEIGHT |
100 cm |
INSTALLATION |
Glue or frame |
BRAND |
VHCT |
Ribbons were the primary inspiration for developing this pattern. The horizontal arrangement and varying gap widths not only create a depth effect but also impart lightness and dynamism to the surface. This design emphasizes the plasticity of the entire collection. It is extremely functional and will perfectly suit any type of interior.
Properties of architectural concrete
-
For indoor and outdoor use
-
Weather-resistant
-
Available in many colors and dimensions
-
Fire-resistant - can be used on fireplaces
-
Natural
Montage
1.
Where will you install?
- Concrete, mineral, ceramic, and plaster surfaces
- Drywall
- OSB, MDF, HPL, PCW boards
- Thanks to the small thickness of the plates, their weight has been minimized, facilitating installation. Before purchasing, check the weight of the plates. The mounting surface should be load-bearing to support the weight of the plates.
2.
How to install?
- Plates can be mounted directly to the substrate using glue, screws, or a mounting system.
- For adhesive installation: clean and prime the surface. Apply the adhesive with a notched trowel to both the wall and the plate. Do not apply the adhesive in patches or in a "frame."
- The thickness of the adhesive between the wall and the plate should not exceed 10 mm.
- If there are doubts about whether the surface can support the weight of the plate, you can create a frame with OSB boards mechanically attached to the wall or secure the plates with screws.
-
Find all installation instructions here:
Technical Sheet.pdf